radiotek
Junior Member level 2
Need Help Finding A Replacement Encoder
Trying to find a replacement mechanical encoder for a Sangean ATS-505 radio I own. The decoder is approximately 11 to 12mm square that's vertically mounted and has a total of 5 contacts, 3 for tuning up and down and 2 for a switch.
Not sure how many detentes but I am sure that anything between 16 and 24 should be OK.
Any help would be greatly appreciated.![Alfa_Rotary_Encoders.jpg Alfa_Rotary_Encoders.jpg](https://www.edaboard.com/data/attachments/81/81941-89da38dee557e471a1f8d16cc206528d.jpg)
Trying to find a replacement mechanical encoder for a Sangean ATS-505 radio I own. The decoder is approximately 11 to 12mm square that's vertically mounted and has a total of 5 contacts, 3 for tuning up and down and 2 for a switch.
Not sure how many detentes but I am sure that anything between 16 and 24 should be OK.
Any help would be greatly appreciated.
![Alfa_Rotary_Encoders.jpg Alfa_Rotary_Encoders.jpg](https://www.edaboard.com/data/attachments/81/81941-89da38dee557e471a1f8d16cc206528d.jpg)