Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Need Definition friends....

Status
Not open for further replies.

Sasi Cm

Junior Member level 1
Joined
Aug 22, 2013
Messages
19
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
112
I want to know what is a bench mark circuit..?
How to give the inputs to a benchmark circuit.?
And how many inputs are there for the benchmark circuit S5378..?
 

1. The IEEE 1997 International Test Conference benchmark circuits are a set of analog and mixed-signal circuits provided for the evaluation and performance of different testing approaches.
https://www.eng.auburn.edu/~strouce/analogbc/BCoverview.htm

2/3. The given circuit s5378 has 35 inputs, 49 outputs, 179 Dtype FF’s and 1775 inverters and 1004 other logic gates. This is an example of a rather large circuit in terms of combinational and sequential elements.
https://www.eng.auburn.edu/~agrawvd/COURSE/E7250_05/REPORTS_PROJ/Sinha_5378.pdf
 

Thanks..And i want to know that for every clock cycle there is a 35 input and 49 output.?
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top