military standard for data links

[sheri_kia]

Hello eyeryone
I need some information about currently used standard about telecommunication, data links and antenna!
please let me know if you have any knowledge about it.
thanks in advance:roll:

 

[not-a-moderator]

The most widely used communication interfaces in the military & avionics world is ARINC-429 and MIL-STD-1553.

https://en.wikipedia.org/wiki/ARINC_429
https://en.wikipedia.org/wiki/MIL-STD-1553

Please try to clear up your question more.

 

[sheri_kia]

Thank you 'not-a-moderator'
But I need some standards that clearly define requirements (and also measurement methods to confirm that requirements) that a data link or antenna needed to be acceptable. for example VSWR must be <1 and how can I measure VSWR, or antenna pattern must be that form and how can I measure and test antenna pattern.
about MIL-STD-1553, isn't it most about serial communication and data format?
I've been searching for wireless communication requirements that used in data links.
thanks again for your answare

 

[not-a-moderator]

Hi There

Now that I understand your question better. Have a look at Appendix A in this document:
**broken link removed**

These are the most common standards:
- Federal Standard 1045A
- MIL-STD-188-141B
- MIL-STD-188-110B
- STANAG 4285
- STANAG 4529
- STANAG 5066
- STANAG 4538