Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Microcontrollers and all kinds of displays

Status
Not open for further replies.

johnny_hush

Member level 1
Member level 1
Joined
Jan 19, 2007
Messages
34
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,475
Hi everybody!
I am a beginner in this area, so I would be grateful to anyone who uploads some tutorials about programming displays with microcontrollers, and anything else that explains how that works.

Thanks,

Johnny
 

dude i dun have any material on that, rather do it myself, tell me whatz ur requirement?

lcds, usually come with driver, so easier to program
7seg leds are to be used with a bcd to 7seg driver
leds, either in matrix or array form can be used easily by the particular hardware connections.

just google out the required info
 

I tried to search on google but I find a lot of information and I'm not sure what is important and what isn't, so that's why I need you help.

Thanks,

Johnny
 

Try using a search
"how to drive an HD4470 LCD with a PIC mcu"
or
"sample codes for driving an HD44780 LCD with a PIC mcu"
hopefully you would come across many hits.
If you intend to drive 7 segment LEDs run a querry at edaboard, or google and may be you could search microchip or atmel website tons of resources.
 

I'll read this what you have posted.
Thank you all...

Johnny
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top