sweetchoto
Full Member level 2
Hi,
I recently modeled an UWB antenna in HFSS. After fabrication there is big deviation in measured results as compared to the simulated ones even though they show the same trend. For example,measured S11,gain and radiation pattern results differ from the simulated ones.
What are the tricks/tips to get simulated results as close as possible to the acutal results. Any tricks in terms of mesh settings, Air Box size etc etc would be helpful from the people who have hands on experience on HFSS.
I recently modeled an UWB antenna in HFSS. After fabrication there is big deviation in measured results as compared to the simulated ones even though they show the same trend. For example,measured S11,gain and radiation pattern results differ from the simulated ones.
What are the tricks/tips to get simulated results as close as possible to the acutal results. Any tricks in terms of mesh settings, Air Box size etc etc would be helpful from the people who have hands on experience on HFSS.