Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

MATLAB Code of Single Sided Band Modulation and Demodulation.

Status
Not open for further replies.

chughtai134

Newbie
Newbie level 3
Joined
Dec 5, 2011
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,324
i want the code of SSB modulation and Demodulation.'
anyone help me....
 

i have made this after all by myself ... some help from some respectful source....
here it is ...

%Single SideBand Modulation
%By Naveed Ahmad Chughtai

N = 1024;
fs = 2048;
ts = 1/fs;
%t = (0:ts:1);
t=(0:N-1)/fs;
fc = 600; %Carrier frequency !! Limit fc<800 to avoid freqdomain aliasing
fm1 = 200;
Em1 = 1;

m = Em1*cos(2*pi*fm1*t); %Message
mh = Em1*cos((2*pi*fm1*t)-pi/2); %Hilbert transform of the message signal


sbu = m.*2.*cos(2*pi*fc*t) - mh.*2.*sin(2*pi*fc*t); %Expression for USB SSB
sbl = m.*2.*cos(2*pi*fc*t) + mh.*2.*sin(2*pi*fc*t); %Expression for LSB SSB

SBU = 2/N*abs(fft(sbu)); %Fourier Transform of USB SSB
SBL = 2/N*abs(fft(sbl)); %Fourier Transform of LSB SSB

freq = fs * (0 : N/2) / N;

close all;
figure(2)
subplot(221);
plot(10*t(1:200),sbu(1:200),'r');%Time Domain Plot of USB SSB
title('Time Domain Representation === USB');
xlabel('Time'); ylabel('Modulated Signal');
subplot(222)
plot(10*t(1:200),sbl(1:200),'b');%Time Domain Plot of LSB SSB
title('Time Domain Representation === LSB');
xlabel('Time'); ylabel('Modulated Signal');

subplot(223);
plot(freq,SBU(1:N/2+1))
title('Frequency Domain Representation');
xlabel('Frequency(Hz)'); ylabel('Spectral Magnitude');
legend('USB');
subplot(224)
plot(freq,SBL(1:N/2+1)); %Frequency domain plot
title('Frequency Domain Representation');
xlabel('Frequency(Hz)'); ylabel('Spectral Magnitude');
legend('LSB');

figure(4)
plot(freq,SBU(1:N/2+1),freq,SBL(1:N/2+1));
title('Frequency Domain Representation');
xlabel('Frequency(Hz)'); ylabel('Spectral Magnitude');
legend('USB','LSB');


%Demodulation:

md=sbu.*cos(2*pi*fc*t);
[b,a]=butter(2,0.1);
mf=filter(b,a,md);
figure(3)
plot(t,mf)
title('Demodulated Signal');
xlabel('Time'); ylabel('Demodulated Signal');

figure(1);
plot(t,m);
title('Time Domain Representation of Orignal Signal');
xlabel('Time'); ylabel('Original Signal');
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top