Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Looking for Ni-MH 2500mA battery charger schematic

Status
Not open for further replies.

Mko

Newbie level 6
Joined
Sep 24, 2004
Messages
12
Helped
2
Reputation
4
Reaction score
1
Trophy points
1,283
Activity points
58
Ni-MH battery Charger

Hi all, Can anybody offer me charger schema for Ni-MH 2500mA battery?

Thanks.
 

Re: Ni-MH battery Charger

check data sheets, companies like LT and TI make discrete charging regulators and the datasheets should explain everything needed to build one.
 

Re: Ni-MH battery Charger

Check the Microchip site. You can find a lot of reference design there.
 

Re: Ni-MH battery Charger

Try this one:
**broken link removed**
As it is rated for 1800mAh, and your battery is 2500mAh, it may need some adjustments (4.7Ω resistor can be replaced with, say, 3.9Ω), but the idea is there ..

Regards,
IanP
 
Last edited by a moderator:

Re: Ni-MH battery Charger

IanP said:
Try this one:
**broken link removed**
As it is rated for 1800mAh, and your battery is 2500mAh, it may need some adjustments (4.7Ω resistor can be replaced with, say, 3.9Ω), but the idea is there ..

Regards,
IanP

Thanks for answer.I tried to use PSpaice to simulate charger circut, but I don't know what can I use instead battery during simulation, because there are not battery models.
 
Last edited by a moderator:

Re: Ni-MH battery Charger

Maybe this will be of any help to you:
**broken link removed**
see pages around 270 ..

Regards,
IanP
 
Last edited by a moderator:

Re: Ni-MH battery Charger

IanP said:
Maybe this will be of any help to you:
**broken link removed**
see pages around 270 ..

Regards,
IanP

Hi,

I have found Ni-MH battery charger circuite based on NE555. Is that true to charge Ni-MH battery with current pulses or with constant current?
 
Last edited by a moderator:

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top