Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

LogTemp Program for 1-Wire

Status
Not open for further replies.

tpetar

Advanced Member level 7
Joined
Sep 27, 2010
Messages
6,417
Helped
1,713
Reputation
3,456
Reaction score
1,673
Trophy points
1,393
Location
Pancevo-Belgrade, Serbia
Activity points
37,363
Original Web address: LogTemp

ltden.png



1-wire sensors / chips supported by LogTemp

DS1820 temperature sensors
Measuring -50°C - +70°C
Resolution 0,1°C, accuracy in practice ±0,5°C
Better accuracy if calibration is used
DS18B20, DS1822 and DS1920 temperature sensors
DS2438
Relative humidity measurements
DS2438 + HIH-3610/4000/4010. Example here
Hobby Boards model
Solar Radiation measurements
DS2438 + photodiode. Example here
Hobby Boards model
Barometer
DS2438 + MPX4115A
Hobby Boards model (B1-R1-A)
Voltage
VAD measurements (0 - 10 V)
DS2423 Counter
Lightning and General Purpose counters
Hobby Boards Lightning Detector
Hobby Boards Dual Counter
Rain gauge
Wind Speed
Energy Consumption (kWh) with graphs
No picture generated from the other values (yet)
DS2405 and DS2406 Switch
Alarm event can e.g. control relay board
DS2406 has one (TO92 package) or two (TSOC package) channels to be used and in general it's more reliable than DS2405
DS2409
DS2409 based hubs based are supported
Hobby Boards model
DS2760
Temperature measurements using type E, J, K, R, S or T thermocouples
UV Index Meter
Hobby Boards special UV Index Meter with 1-Wire interface
Not recommended due to serious design failures of the meter. Poor temperature compensation and missing CRC protection. Not usable below +10°C temperatures
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top