Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

ISP programming of AT89C51ED2

Status
Not open for further replies.
K

krunal_299

Member level 4
Joined
Jan 24, 2008
Messages
68
Helped
2
Reputation
4
Reaction score
1
Trophy points
1,288
Activity points
1,800
Hi to all,
I have gone through the datasheet.
According to the datasheet of the chip, it can be programmed through its USART terminals.
But is it possible for ISP programming via its SPI terminals?
This is my concern because I do have one board with at89c51ed2 having ISP header which is connected to SPI terminals of at89c51ed2.
That's why I need to know if it is possible to program the chip via SPI or not.

Thanks
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top