Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

IR transmiter output power problem

Status
Not open for further replies.
I guess the 4th gate of 4011 is not used yet.
If you use it to invert the signal at pin 3 then your n-channel MOSFET will work fine.

Kerim
 

Thank you, so i guess there is no p-channel MOSFET i can use in this case?

KerimF said:
I guess the 4th gate of 4011 is not used yet.
If you use it to invert the signal at pin 3 then your n-channel MOSFET will work fine.

Kerim
Click to expand...

But i do not know how to do it, yes i know i have a lot to learn, and i will do it :)
 

But the 4th gate of 4011 is still free on your IC ... right?
If yes, I will try to draw what you will change at the output.

Please tell me if you like to use p-MOS instead of n-MOS... ok?
 

Oh... it is free & it is for frequency check... Sorry, I couldn't get which one is more important ;)
 

My mistake, i do frequency chceck on pin 4 not 4th gate, for now all is like on image in first post.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top