mankan
Junior Member level 1
- Joined
- Apr 6, 2010
- Messages
- 16
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Location
- California
- Activity points
- 1,410
Hello
I am using HFSS for my PCB trace SI simulation. In my sweeps, the solver getting struck in one point at a particular interpolation error thinking that in that frequency convergence will occur. for example at freq 2.5 GHz where the interpolation error is 33%, the solver is thinking the convergence will occur at that frequency range making successive simulation in frequencies nearby to that.
Anyone faced this problem and have a solution please reply back.
Thanks
I am using HFSS for my PCB trace SI simulation. In my sweeps, the solver getting struck in one point at a particular interpolation error thinking that in that frequency convergence will occur. for example at freq 2.5 GHz where the interpolation error is 33%, the solver is thinking the convergence will occur at that frequency range making successive simulation in frequencies nearby to that.
Anyone faced this problem and have a solution please reply back.
Thanks