Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

interfacing parralel port to 89c52

Status
Not open for further replies.

ronzam2002

Member level 5
Member level 5
Joined
Aug 20, 2007
Messages
81
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,288
Location
san juan
Activity points
1,850
Can I interfece a parallel port which is used to connect on the printer in connceting in the at89s52?
 

Yes you can. You can use all at89s52's port to connect to LPT port on computer. Computer's parallel port has three port, data port, control port, and status port. If you only need simple communication, you may just use data port connected with one of at89s52's port (P0, P1, P2, or P3).
 

    ronzam2002

    Points: 2
    Helpful Answer Positive Rating
why don't you look at
beyond logic.com
or
search for the book (on this forum)
parallel port complete by Jan Axelson.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top