Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Interfacing of rf transmitter to ARM LPC2148........

Status
Not open for further replies.

apurvapatil.apurva@gmail.

Newbie level 3
Newbie level 3
Joined
Apr 8, 2011
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,300
hello.....
I am trying to interface rf transmitter with lpc2148.
For this i wanted to ask dat is it possible to interface it using the uart.....???
and if yes how to do so???
 

Which rf module module are you referring to... some of the RF modules and rf transceiver allow UART interface, If the module you have provides these interface then you can interface it to 2148.
read or post the data sheet of the module.....
 

actually i havent decided which module to use... Can u suggest any which will allow me to use it through uart??
 

I think tws/rws 434 will be fine for my purpose.
What i have to do is transmit sensor readings(2 sensors 1 pressure n other gas) from my robot vehicle to the PC to be displayed on it.And for this purpose i need to use the serial port of lpc2148. Can u help me with this?
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top