Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Insertion loss plot not starting from zero in HFSS

Status
Not open for further replies.
M

mankan

Junior Member level 1
Joined
Apr 6, 2010
Messages
16
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
California
Activity points
1,410
I imported my brd file in to HFSS through Allegro and ansoft links. I did all the necessary changes and analyzed. Now I am getting more losses compared to the measured data. At 10GHz I am getting -8Db loss.

One of my problems in that plot is the insertion loss plot versus frequency is not starting from Zero at zero frequency.

Anyone know why it is not starting from zero?


Thank You
Mani
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top