Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

INFO Op amp with current mirror wide-swing cascode

Status
Not open for further replies.

Bode82

Newbie level 6
Newbie level 6
Joined
Jul 9, 2006
Messages
14
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,371
wide swing op

Hi, i'm a Italian student on electronic engineering.With other two friend,we are making a project that it consists in a op-amp with current mirror wide-swing cascode.This project is my first project.The particularitity of thi project is that we must use the gm/id methodologieand we don't known the first pass to starting this project!!!
Where we can find material to help us!!!Thank for the help and we hope that anyone can help us!!!
 

current mirror op amp

First you should define your branch current base on your spec.
And then choose the each transistor's W/L ratio on your Gm/Id value.
 
current-mirror opamp

hello,
i always noted the discussions about gm/id methodology ,can anyone explain what is it , a good resource will be great too.
thnx
 

Sorry but I don't understand very well your answer....I want know if I post my circuit's design you can help me?
 

Hi friends
pls see this books
1. Design of analog CMOS integrated circuit , Behzad Razavi
2 search for this book in our fourm "Maloderti150mod"
i am sure after you can fiend alot of information and examples
Good luck
 

I don't understand where I can find this book:Maloderti150mod!!!
 

Bode82 said:
Hi, i'm a Italian student on electronic engineering.With other two friend,we are making a project that it consists in a op-amp with current mirror wide-swing cascode.This project is my first project.The particularitity of thi project is that we must use the gm/id methodologieand we don't known the first pass to starting this project!!!
Where we can find material to help us!!!Thank for the help and we hope that anyone can help us!!!

I managed to find this articol. Maybe you find it helpful
rgds

MAloberti150mod is the name of a book by Maloberti, which can be useful
 

I wrote MAloberti150mod in google but nothing!!!!Is it possible!!
 

Bode82 said:
I wrote MAloberti150mod in google but nothing!!!!Is it possible!!

try to look for Maloberti on elektroda...I have it as pdf
 

I find this site but thel link was deleted

Can you give me a link for this book?
 

The paper is very useful, now I understand gm/id, too.
Thank you very much!
Best regards!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top