Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

In cst, when I excite the 1v/m, it is not 1v/m as a results.

Status
Not open for further replies.
H

happytgt

Newbie level 5
Joined
Nov 3, 2009
Messages
9
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Seoul
Activity points
1,351
In CST, MWS, frequency solver,


I excite the x-polarized plane wave of 1v/m at the end of the z_min.

Every volume is filled with air then there is no problem. Every field intensity

in every point is about 1v/m.


but,

when every volume is filled with dielectric material(not vaccum),

every field intensity is varying with the every position. How can I reduce

this phenomenon? I excite the plane wave

from z_min side which is filled with SiO2 substrate(not vaccum..) to the metallic

nano aperture .

I want to

guarantee that my incident intensity is 1 at the near of the entrance of the

nano-aperture.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top