mohansaini
Junior Member level 1
Referred to the attached circuit from the same forum i need to convert DC 0-60V to 0-5Vdc. As it is shown at the input of op-amp we need to connect 0-10V at the input for that purpose i have connected a voltage divider of 100K and 200K POT which will give 10V at 60V input
i have connected R3=100K but i am getting 3.9V max at the output of second op-amp. and its same at the 30V input as well. what could be the problem? and please suggest any solution.
The idea was taken from here
https://www.edaboard.com/threads/217799/
i have connected R3=100K but i am getting 3.9V max at the output of second op-amp. and its same at the 30V input as well. what could be the problem? and please suggest any solution.
The idea was taken from here
https://www.edaboard.com/threads/217799/
Attachments
Last edited: