Identify capacitor with marking code L62 104

[Teslavivek]

Hi, Pls Anybody Tell me,what type of capacitor ?? the capacitor wrote it L62 104

 

[kripacharya]

Please post a hi-res pic of the component.

While we wait for that, "104" probably implies 10,000 pF, or 0.01nF. The pic would clarify if this is correct or not.

 

[KlausST]

Hi,

I agree with: "104 means 10,000 pF" = 10 x 10^4 pF (can be found million times in the internet)

But it's 10nF then...

Klaus

 

[bking]

The 104 is a 100nF / 0.1uF. The caps are typically marked with the first two digits significant and the third digit indicates # of 0's to follow.

The L62 may be a lot # / date code for a manufacturer or some other parameter info coded by the manufacturer.

 

[KlausST]

Hi,

Of course. 100n.

10 x 10^4 = 100,000 pF.

Maybe it's a bit late today for me.

Klaus

 

[Teslavivek]

Thanks for your reply Mr.klaus,

I know that was 0.1microfarad...but I need to know why they mention L62 & some other capacitor X5R??

 

[andre_luis]

but I need to know why they mention L62 & some other capacitor X5R??

Who mentioned that? Datasheet? Mark code?

Review post #2:

post a hi-res pic of the component

 

[kripacharya]

Hi,

Of course. 100n.

10 x 10^4 = 100,000 pF.

Maybe it's a bit late today for me.

Klaus

Agreed. Even later for me. 100nF it is.

- - - Updated - - -

Thanks for your reply Mr.klaus,

I know that was 0.1microfarad...but I need to know why they mention L62 & some other capacitor X5R??

Well, the X5R notation is well known - it specifies temperature/ stability/ voltage etc. The L62 don't know.

Is there a pic, or is this just a theoretical question?

 

[Teslavivek]

I troubleshooting mosfet driver their they using this type capacitor for boostrap operation, so I need to replace the capacitor because that one faulty

 

[Teslavivek]

I troubleshooting mosfet driver,I found this type capacitor was they using boostrap operation ....so I need to replace the capacitor because this capacitor was faulty

That's why I ask this what type of capacitor?? In universal case most of electronics people they using X7R type capacitor for boostrap operation....but this one different type (L62)

 

[KlausST]

Hi,

OK, why not think the other way round?
You say the capacitor is defective ... then maybe it wa not the best suited capacitor for this application.

--> find out the Mosfet_driver_partname, download the datasheet and find out what the manufacturer recommends.

Klaus