Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

IC Identification based on the data written on the IC

Status
Not open for further replies.

vipinsaini

Junior Member level 3
Junior Member level 3
Joined
Aug 24, 2009
Messages
30
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
DELHI(INDIA)
Activity points
1,494
I have an IC, the above screen printing is:

The first rows of 3620-00
second row is the MS2PA
third row is AB0939

The package is a SOP-8.

So can anybody tell me that what is the make of this IC and from where i can get the IC and datasheet?
I want to get the info as soon as possible.



Thanks & Regards
Vipin Kumar Saini
 

Thank you so much for your kind and valuable reply.
Shashi,i am little bit confuse because if we consider that pin no. 7 & 8 are D1 and pin no. 5 & 6 are D2 then the pin no. 5 & 6 as well as 7 & 8 should be short internally. But wheni check the continuity from multimeter then there is no continuity/shorting.
And i am using this IC in an LED DRIVER(SMPS).
I am using an external MOSFET too.
So i am confuse.
When i search this part from the internet then is no useful info regarding this IC.

I found a link from the internet regarding this IC but not useful. I am writing that link over here.
https://bbs.dianyuan.com/topic/638765
 

Is there no other technical person who can identify this IC (LED Driver IC) ?
I think it's chinese brand IC due to which it's little bit hard to identify.
But is anybody can help me in this matter then it will be very appreciated.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top