I have a problem at simulation

[hammam123]

**** 06/22/21 17:29:52 *********** Evaluation PSpice (Nov 1999) **************

* C:\Users\hamma\OneDrive\Documents\qustion1Final.sch


**** CIRCUIT DESCRIPTION


******************************************************************************




* Schematics Version 9.1 - Web Update 1
* Mon Jun 21 22:19:12 2021



** Analysis setup **
.OP


* From [PSPICE NETLIST] section of pspiceev.ini:
.lib "nom.lib"

.INC "qustion1Final.net"

**** INCLUDING qustion1Final.net ****
* Schematics Netlist *



R_R4 $N_0002 $N_0001 81
R_R2 $N_0003 Hammam 58
R_R1 $N_0004 $N_0001 50
E_E1 $N_0001 $N_0004 $N_0001 0 0.2
G_G1 $N_0004 Hammam $N_0003 0 5
R_R3 Hammam $N_0002 51
V_V3 $N_0002 0 100V
H_H5 $N_0001 $N_0002 VH_H5 0.02
VH_H5 0 Hammam 0V

**** RESUMING qustion1Final.cir ****
.INC "qustion1Final.als"



**** INCLUDING qustion1Final.als ****
* Schematics Aliases *

.ALIASES
R_R4 R4(1=$N_0002 2=$N_0001 )
R_R2 R2(1=$N_0003 2=Hammam )
R_R1 R1(1=$N_0004 2=$N_0001 )
E_E1 E1(3=$N_0001 4=$N_0004 1=$N_0001 2=0 )
G_G1 G1(3=$N_0004 4=Hammam 1=$N_0003 2=0 )
R_R3 R3(1=Hammam 2=$N_0002 )
V_V3 V3(+=$N_0002 -=0 )
H_H5 H5(3=$N_0001 4=$N_0002 )
VH_H5 H5(1=0 2=Hammam )
_ _(Hammam=Hammam)
.ENDALIASES


**** RESUMING qustion1Final.cir ****


.probe


.END

ERROR -- Less than 2 connections at node $N_0003

 

[frankrose]

Hi,

Please add somehow labels to your nets, run sim again and show output log.
In the outlog you attached the error is with $N_0003, in the picture it is with $N_0001 net. It is not obvious for me now where is the issue.