How to use SRL16 primitive in my verilog program

[Mkanimozhi]

verilog primitive

Hi,
How to initiate the SRL16 LUT in my verilog program , because i m getting error when i simulate my program using SRL16, in VHDL we include unisim library inour program , like wise what to initiate in verilog program,reply me quickly


regards
kanimozhi

 

[cherjier]

srl16

Hi Mkanimozhi,

you can show your VHDL contruct of your SRL16 and your error message here so that other have better picture of your problem.

for verilog, you just instantiate the SRL16 in your code. and set the unisims as your library. you can find in under your xilinx directory.

example are shown below:
SRL16 MY_SRL16 (
.Q (16bits_shifted_output),
.A0 (a),
.A1 (b),
.A2 (c),
.A3 (d),
.CLK ( input_clk),
.D (your_16bits_data_input)
);

note that a,b,c,d are your shift length. if they are all 0, then our shift length will be 1 bit, will they are all 1, shift length is 16 bits.

 

[Mkanimozhi]

errno = enoent verilog

Hi cherjier,

Thank u very much for your reply,But I m getting this error message when i simulate the program.I need to use the unisim library in my verilog program,how to use,reply me some one soon.

MY ERROR

# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB7.v(121): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f10/Isb7
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB7.v(122): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f10/Isb7
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB7.v(125): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f10/Isb7
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB7.v(126): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f10/Isb7
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB7.v(127): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f10/Isb7
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB7.v(128): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f10/Isb7
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB7.v(230): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f10/Isb8
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB7.v(231): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f10/Isb8
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB7.v(232): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f10/Isb8
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB7.v(233): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f10/Isb8
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB7.v(236): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f10/Isb8
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB7.v(237): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f10/Isb8
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB7.v(238): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f10/Isb8
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB7.v(239): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f10/Isb8
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB1.v(119): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb1
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB1.v(120): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb1
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB1.v(121): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb1
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB1.v(122): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb1
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB1.v(125): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb1
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB1.v(126): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb1
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB1.v(127): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb1
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB1.v(128): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb1
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB2.v(118): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb2
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB2.v(119): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb2
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB2.v(120): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb2
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB2.v(121): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb2
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB2.v(124): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb2
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB2.v(125): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb2
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB2.v(126): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb2
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB2.v(127): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb2
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB3.v(117): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb3
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB3.v(118): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb3
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB3.v(119): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb3
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB3.v(120): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb3
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB3.v(123): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb3
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB3.v(124): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb3
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB3.v(125): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb3
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB3.v(126): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb3
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB4.v(123): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb4
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB4.v(124): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb4
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB4.v(125): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb4
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB4.v(126): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb4
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB4.v(129): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb4
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB4.v(130): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb4
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB4.v(131): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb4
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB4.v(132): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb4
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB5.v(120): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb5
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB5.v(121): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb5
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB5.v(122): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb5
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB5.v(123): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb5
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB5.v(126): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb5
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB5.v(127): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb5
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB5.v(128): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb5
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB5.v(129): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb5
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB6.v(122): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb6
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB6.v(123): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb6
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB6.v(124): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb6
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB6.v(125): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb6
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB6.v(128): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb6
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB6.v(129): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb6
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB6.v(130): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb6
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB6.v(131): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb6
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB7.v(119): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb7
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB7.v(120): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb7
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB7.v(121): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb7
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB7.v(122): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb7
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ./work
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to access library 'unisims_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/unisims_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-3033) SB7.v(125): Instantiation of 'MUXF5' failed. The design unit was not found.
# Region: /sea/Isea_f11/Isb7
# Searched libraries:
# ** Error: (vsim-19) Failed to access library 'xilinxcorelib_ver' at "C:\Modeltech_xe_starter\win32xoem/../xilinx/verilog/xilinxcorelib_ver".
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-19) Failed to acc

 

[cherjier]

how to use verilog primitive

i guess you did not compile the xilinx library in modelsim. you need to compile all the verilog library before it can be used in modelsim. you can use "vlog" to compile the library.

if not sure about the GUI, if you use script, you can upload it here so that we can help you check on that.

 

[Mkanimozhi]

instantiation of srl16 failed

Hi,
How to use the vlog to comple the library, please tell me in detail, i need to finish this project within today,please guide me.

kanimozhi

Added after 35 minutes:

Hi,
This is a one of the program file in my project , In this I am using MUXF5 primitive , but when i simulate it i m getting error which i was mentioned in my previous thread, please some one help me how to initiate the and use the MUXF5 primitive in my program, which library i should initiate in my program and how to use it in my verilog file

`timescale 1ns / 1ps
//////////////////////////////////////////////////////////////////////////////////
// Company:
// Engineer:
//
// Create Date: 10:00:40 01/12/2009
// Design Name:
// Module Name: SB6
// Project Name:
// Target Devices:
// Tool versions:
// Description:
//
// Dependencies:
//
// Revision:
// Revision 0.01 - File Created
// Additional Comments:
//
//////////////////////////////////////////////////////////////////////////////////




/* Sbox 6 */

module SB6(addr,da,db);
input [1:6] addr;
output [1:4] da;
output [1:4] db;
reg [1:4] d0;
reg [1:4] d1;
reg [1:4] d2;
reg [1:4] d3;


always @(addr) begin
case (addr[2:5])
0: d0 = 12;
1: d0 = 1;
2: d0 = 10;
3: d0 = 15;
4: d0 = 9;
5: d0 = 2;
6: d0 = 6;
7: d0 = 8;
8: d0 = 0;
9: d0 = 13;
10: d0 = 3;
11: d0 = 4;
12: d0 = 14;
13: d0 = 7;
14: d0 = 5;
15: d0 = 11;
endcase
end

always @(addr) begin
case (addr[2:5])
0: d1 = 10;
1: d1 = 15;
2: d1 = 4;
3: d1 = 2;
4: d1 = 7;
5: d1 = 12;
6: d1 = 9;
7: d1 = 5;
8: d1 = 6;
9: d1 = 1;
10: d1 = 13;
11: d1 = 14;
12: d1 = 0;
13: d1 = 11;
14: d1 = 3;
15: d1 = 8;
endcase
end

always @(addr) begin
case (addr[2:5])
0: d2 = 9;
1: d2 = 14;
2: d2 = 15;
3: d2 = 5;
4: d2 = 2;
5: d2 = 8;
6: d2 = 12;
7: d2 = 3;
8: d2 = 7;
9: d2 = 0;
10: d2 = 4;
11: d2 = 10;
12: d2 = 1;
13: d2 = 13;
14: d2 = 11;
15: d2 = 6;
endcase
end

always @(addr) begin
case (addr[2:5])
0: d3 = 4;
1 : d3 = 3;
2 : d3 = 2;
3 : d3 = 12;
4 : d3 = 9;
5 : d3 = 5;
6 : d3 = 15;
7 : d3 = 10;
8 : d3 = 11;
9 : d3 = 14;
10: d3 = 1;
11: d3 = 7;
12: d3 = 6;
13: d3 = 0;
14: d3 = 8;
15: d3 = 13;
endcase
end

// mux the first two together in F5 muxes
MUXF5 s10 ( .I0(d0[1]), .I1(d1[1]), .S(addr[6]), .O(da[1]) );
MUXF5 s11 ( .I0(d0[2]), .I1(d1[2]), .S(addr[6]), .O(da[2]) );
MUXF5 s12 ( .I0(d0[3]), .I1(d1[3]), .S(addr[6]), .O(da[3]) );
MUXF5 s13 ( .I0(d0[4]), .I1(d1[4]), .S(addr[6]), .O(da[4]) );

// mux the second two together in F5 muxes
MUXF5 s20 ( .I0(d2[1]), .I1(d3[1]), .S(addr[6]), .O(db[1]) );
MUXF5 s21 ( .I0(d2[2]), .I1(d3[2]), .S(addr[6]), .O(db[2]) );
MUXF5 s22 ( .I0(d2[3]), .I1(d3[3]), .S(addr[6]), .O(db[3]) );
MUXF5 s23 ( .I0(d2[4]), .I1(d3[4]), .S(addr[6]), .O(db[4]) );

endmodule

regards
kanimozhi.m

 

[BlackOps]

xilinx srl16

in ModelSim go to File-->New-->Library,

1.Select "map to an existing library"

2.in the library name type: unisims_ver

3. press browse, and choose unisims_ver file in: C:\Modeltech_6.1b\xilinx\verilog

press OK,

then on the left side tab you will see unisims_ver library icon, right mouse button press on it, and choose Refresh, wait for it to complete. and then recompile your design.

hope this helps.

 

[cherjier]

simulate srl16

sorry for the delay, hope it's not too late for you.

this is just the basic script file.
you can just change the path to your own directory and double click the test.bat

 

[teja321]

xilinx verilog srl16

if u have xilinx ise run "compxlib" from ur command prompt it will help u generate the necessary libraries and also modify modelsim.ini