Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

how to turn on PC using RAC (Remote Acces Client)

Status
Not open for further replies.

Li_ereunpisan

Full Member level 5
Full Member level 5
Joined
Jul 14, 2009
Messages
260
Helped
32
Reputation
64
Reaction score
28
Trophy points
1,308
Location
Bandung, Indonesia
Activity points
2,768
I used the RAC client and RAC server for monitoring PC, I use 15 PC ...
turn off PC from the RAC server can do it but how do I turn on the PC from the Server
 

Thise PCs must have Wake On LAN enabled option.

I used such thing in network with 265 PCs. Not RAC software, but familiar.
 

@thx tpetar
I also have done it .. but do not know why it is still not able to

as a recommendation to use what software? other than using RAC
 

thx jon...
but,I am not connected to the internet, which I use about a building in an offline status
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top