Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to set Fastrack GSM Modem to received message and display at LCD

Status
Not open for further replies.
K

kie256

Newbie level 2
Joined
Oct 25, 2011
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,291
Hello i need help in program,how to set GSM can received message and display at LCD. I use PIC16F877A and connect GSM with RS232.
The problem now what instruction of AT command should i use, AT+CMGR=1 ,AT+CGMS and many more.and how to set gsm program with lcd program?
 

See example video and code of GSM. More, you need to read AT command manual and edit the code.
 

thanks a lot to you...one more,which pin must to connect direct from GSM modem to RS232?for your information i'm use Fastrack Wavecorm GSM modem.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top