Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how to plot part of the waveform in cadence ADE

Status
Not open for further replies.
X

xuedashun

Member level 1
Joined
Aug 30, 2005
Messages
39
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,286
Activity points
1,582
I have 100us simulation result. If the startup part (say 0-5us) is not good and I don't want to plot it at all. I want to plot is from 5us-100us.

Is there any way to set the 5us-100us as a default option so that it can be plotted automatically each time after the simulation is done? Thank you!
 

put the following formula in the "outputs" window in Analog Artist or in the calculator
Code: 
clip(VT("/net"),5u,100u)
where /net is the net you want to plot
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top