phil_jp1
Newbie level 2
Hi guys!
The other day I found that there's almost no good videos on how to make PCB's using Toner Transfer method. So I tried to make one. It doesn't cover all the aspects of PCB making, but it's a good place to start.
With this method you can easily and repeatedly make boards with tracks as thin' as 0.01in (0.254mm) and use chip capacitors and resistors down to 0603 size (0402 for maniacs only).
Here you can find the video and some photos:
http://jumperone.com/2011/06/how-to-make-pcb-using-toner-transfer-method/
Hope you will like it
The other day I found that there's almost no good videos on how to make PCB's using Toner Transfer method. So I tried to make one. It doesn't cover all the aspects of PCB making, but it's a good place to start.
With this method you can easily and repeatedly make boards with tracks as thin' as 0.01in (0.254mm) and use chip capacitors and resistors down to 0603 size (0402 for maniacs only).
Here you can find the video and some photos:
http://jumperone.com/2011/06/how-to-make-pcb-using-toner-transfer-method/
Hope you will like it