Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to increase IIP2 of single-input LNA

Status
Not open for further replies.

pavel_adameyko

Full Member level 4
Full Member level 4
Joined
Jun 23, 2010
Messages
190
Helped
52
Reputation
104
Reaction score
37
Trophy points
1,308
Location
Belarus
Activity points
2,338
Hi, friends !
Does somebody know some methods to increase IIP2 of common-source low-noise amplifier?
Appreciate any suggestions.
Thanks for advance.
 

IIP is related to Gm of the transistor.Because if you expand Gm relationship into power series, you'll see some coefficients that are related to Ids .If you check Ids vs Vgs ( for instance for pHEMT ) you will see a curve looking a crest.If you take derivative of this
curve, you see nulling point at one single point on the Vgs axis.This is your operating point for zero ( theorotically) second order distortion.
 

Thanks, BigBoss, for your reply.
But when i take curve Ic vs. Vbe (for bipolar transistor) and then plot it's second derivative - it never becomes zero between 700mV and 900 mV, which is suitable operating range for LNA.
 

You can check out Jose Pedro's book "Intermodulation Distortion in Microwave and Wireless Circuits" and his publications. He describes how to predict IMDs using transfer function (Ic vs. Vbe in your case) in great detail.

Differentiating Ic vs. Vbe curve obtained from DC measurement may be inaccurate. You can try measure the coefficients at harmonic frequencies. This paper describes this method.
Maas, S.A.; Crosmun, A.; , "Modeling the gate I/V characteristic of a GaAs MESFET for Volterra-series analysis," Microwave Theory and Techniques, IEEE Transactions on , vol.37, no.7, pp.1134-1136, Jul 1989
doi: 10.1109/22.24559
URL: IEEE Xplore - Sign In
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top