Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
35-75% dutycycle.
my absolute requirement is to make 400hz clock to drive mosfet for inverter. i need two 400signal(on is inverted).while starting the frequency will gradually increses from low value to 400hz(for the safety of mosfet). thenafter it must be constant.in normal condition the duty cycle must be 50%.i have a voltage f/b.if the o/p goes to high then dutycycle need to be decrese and if o/p goes low ,it must be increased.
this is my 1st stage to make a 400hz clock
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
