Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to do VCO phase noise analysis in ADS ??

Status
Not open for further replies.

vbhupendra

Full Member level 4
Full Member level 4
Joined
May 11, 2005
Messages
235
Helped
15
Reputation
30
Reaction score
10
Trophy points
1,298
Location
GOA, INDIA
Activity points
3,219
VCO Phase noise Analysis

I have designed a cross coupled cmos LC VCO.

how to do phase noise analysis in ADS ??
 

Re: VCO Phase noise Analysis

use the noise controller , and adjust the frequency sweep
and select the output nodes to get the phase noise

check the help

khouly
 

Re: VCO Phase noise Analysis

khouly said:
use the noise controller , and adjust the frequency sweep
and select the output nodes to get the phase noise

check the help

khouly

Hi knouly, would you like to talk more about it?
Regards.
 

Re: VCO Phase noise Analysis

sure , ask and if i know the answer i will provide it

i wil try to make ads project with VCO analysis , and upload it , but i need sometime

i have made a very simple ring oscillator simulation with ads "very simple" , try to check it , and we can discuss it


khouly
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top