whitewiz
Member level 3
I have got PMBD7000 (3 pin diode) Pspice model from NXP Semiconductor web-site. This model contains 2 diodes and 3 pins in the diagram
After automatic converting the spice file of PMBD7000(Lib->OLB) using Pspice model editor and put the library in the OrCAD Capture window, only 2 pin symbols are shown in the screen.
I am wondering there are wrong conversion in the pspice model editor of OrCAD Pspice(Ver. 9.1).
Please give me any advice to correct conversion ?
I attached the spice file, symbol diagram and converted file(old).
Thanks.
*
******************************************
*
*PMBD7000
*
*NXP Semiconductors
*
*High-speed double diode
*
*
*
*
*
*
*
*
*
*
*
*VRRM = 100V
*IFRM = 450mA @ tp =
*trr = 4ns
*
*Package: SOT23
*
*Package Pin 1: Anode
*Package Pin 2: Cathode
*Package Pin 3: common connection
*
*
*
*Simulator: PSPICE
*
******************************************
*
.MODEL PMBD7000 D
+ IS=6.0289E-9
+ N=2.1283
+ RS=1.0000E-3
+ IKF=37.638E-3
+ CJO=593.63E-15
+ M=.1
+ VJ=.68774
+ ISR=2.0646E-9
+ NR=4.9950
+ BV=113.60
+ IBV=10
+ TT=5.7708E-9
.ENDS
*
After automatic converting the spice file of PMBD7000(Lib->OLB) using Pspice model editor and put the library in the OrCAD Capture window, only 2 pin symbols are shown in the screen.
I am wondering there are wrong conversion in the pspice model editor of OrCAD Pspice(Ver. 9.1).
Please give me any advice to correct conversion ?
I attached the spice file, symbol diagram and converted file(old).
Thanks.
*
******************************************
*
*PMBD7000
*
*NXP Semiconductors
*
*High-speed double diode
*
*
*
*
*
*
*
*
*
*
*
*VRRM = 100V
*IFRM = 450mA @ tp =
*trr = 4ns
*
*Package: SOT23
*
*Package Pin 1: Anode
*Package Pin 2: Cathode
*Package Pin 3: common connection
*
*
*
*Simulator: PSPICE
*
******************************************
*
.MODEL PMBD7000 D
+ IS=6.0289E-9
+ N=2.1283
+ RS=1.0000E-3
+ IKF=37.638E-3
+ CJO=593.63E-15
+ M=.1
+ VJ=.68774
+ ISR=2.0646E-9
+ NR=4.9950
+ BV=113.60
+ IBV=10
+ TT=5.7708E-9
.ENDS
*