Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to calculate Power Budget (consumption) of board ??

Status
Not open for further replies.

0by1

Junior Member level 2
Junior Member level 2
Joined
May 10, 2011
Messages
22
Helped
2
Reputation
4
Reaction score
1
Trophy points
1,283
Activity points
1,422
Hi all,

Please clarify my doubts about power budget calculation of board.

(1) total power = No. of devices x [ ( supply current x supply voltage) + ( leakage current x supply voltage) ] am I right ??:?:

(2) Whether I have to consider input/output current (Iol..Ioh..)???, specially in case of transceivers, buffers.

Thanks in advance.
 

1) Generally, power drawn by a circuit equals the input voltage times the current it draws. Or equally it is the sum of the voltages multiplied by the currents of all the subcircuits/subdevices in the circuit
 
  • Like
Reactions: sure and 0by1

    0by1

    Points: 2
    Helpful Answer Positive Rating

    sure

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top