Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to build Wireless microphones for a vocalgroup?

Status
Not open for further replies.
K

Kaarel

Junior Member level 1
Joined
May 6, 2005
Messages
15
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,398
I want to build wireless microphones. They should use the UHF or VHF frequencies for not to disturb the other channels (radio, ambulance, police etc.). there are some frequencies ( above 860 or sth.) that aren`t illegal, but how should i built that sort of microphone? Any schemes, circuits?
 

it would be best, if the frequency is above 860 MHz ( these UHF or VHF frequencies what are normally using the profi microphones)
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top