Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How can I convert Verilog code (gatelvel) to Schematic?

Status
Not open for further replies.

ahmad_abdulghany

Advanced Member level 4
Advanced Member level 4
Joined
Apr 12, 2005
Messages
1,206
Helped
102
Reputation
206
Reaction score
22
Trophy points
1,318
Location
San Jose, California, USA
Activity points
11,769
convert verilog to schematic

Hi,

I've a large Verilog code in the gate level (after synthesis) is it possible to convert it to a more readable format like block level that is read from any schematic viewer?

Thanks,
Ahmad
 

converting verilog to schematic capture

Hi, You can try debussy or verdi
 

schematic to verilog code

verilog -> logic synthesis -> verilog in (cadence tool )

or use debussy but not synthesis
 

Hi,

Can any one send me the software or tool name which will convert verilog code to RTL(schematic) view???

Please reply as early as possible.
Thanking you,
 

I think you can use the software Design Vision from Synopsys to convert verilog to schematic.. :)
 

If you want to implement your design in FPGA u can use Xilinx ISE. Load ur design and synthesise by doible clicking "Syntheise"...............After synthesising u can view the RTL schematic.....Press the "+" button of "Synthesise" ..........and press "RTL schematic".....U can refer to Xilinx Documentation

If u want to implement ur design as ASIC use Synopsys DC.............there is a shortcut to view the RTL schematic...........refer to manual
 

Mr.vivek
I have simulated in Xilinx ISE and synthesized it too. after that I got two schematics RTL and technology .... If I want to use the schematic for another circuit in mentor graphics which one to use????
awaiting your reply,


sincerely ,
M.S.Chandra Sekhar
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top