Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

High quality band-pass filter for 10MHz OCXO?

Status
Not open for further replies.

Scheldoniq

Junior Member level 1
Joined
Oct 31, 2012
Messages
16
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,407
I need a filter for shaping the output sine wave of 10 MHz OCXO,
I would use 5-7 pole crystal filter, but collecting crystals for such a filter is quite a pain in the butt.
There is a similar filter with less demands on space time and money
 

Vectron has a good selection of crystal filters. For instance the following is a 10 MHz, 6 pole filter, 38x18 mm.
 

Attachments

  • Vectron MQF10.0-0300_04.pdf
    30.7 KB · Views: 108

Any idea what might be the price of the filter Vectron?
 

Any idea what might be the price of the filter Vectron?
These filters for Vectron manufactured at our factory for 8pole 10MHz filter can expect a price of around $ 50
 

OK this is for my application too expensive.
I'll try to assemble the filter of crystals.
The chance to assemble such a filter the crystals bought on **broken link removed**?
Another question as simple as free vector analyzer to measure the parameters of the crystal?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top