Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

help required on final year project on Monitoring system for power Generators

Status
Not open for further replies.
S

sam001

Junior Member level 2
Joined
Apr 12, 2013
Messages
20
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
pakistan
Activity points
1,442
i want to work on " Monitoring system for power Generators" as my final year engineering project.
in this project, i will monitor the load voltage/current, and fuel level of generator and will show it on LCD wirelessly by using gsm. And generator will be turned off in severe conditions. I will use PIC micro-controller for this project. KIndly Guide me.
  1. Which sensors should i use in this project ?
  2. how to turn off generator?
  3. how to use gsm for wireless control and monitoring ?
  4. how to use controller in this project?
  5. any project report on this topic or relevant topic ?
  6. schematic diagrams and controller coding ?
  7. simulation circuit?


If you help me, i'll highly thankful to you:)
Thanking you
Sam
Karachi, Pakistan
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top