Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Help me optimize a DBR filter

Status
Not open for further replies.

rda

Newbie level 6
Newbie level 6
Joined
Apr 15, 2008
Messages
13
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,281
Activity points
1,354
filter optimization!

i need help to optimize this dbr filter!

i sythetize my DBR filter with ADS with ideal line and i post here the sheme!
after that
I transcribed the lresults by using line calc and then on new window ADS I simulated my circuit with the acquired length, and as you can see it, results don't corresponds in no way to those acquired in ideal lines because i do not take into account models of incoherence of end of lines and junctions

so, my question what is the procedure of optimization to find the new length of microstrip lines to find which gets closer most ideal case????

THANX
 

Re: filter optimization!

ok,i finnaly got it!!!
if someone is interested by the results i post them below!

my error in the design i posted above is that i don't take in acount from the effective permittivity!
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top