xanhphysics
Junior Member level 1
Hi everybody .
I 'm a new beginner in electronic . I got a specification which need design by Candece .Unfortuately , I m not sure which topology i should choose for my deisgin.
This is my specification :
Design a two stage op amp which satisfy :
Using 0.18u technology :
Vdd=1.8 V
Gain>60db
Gain BW >5MHz
Setting <0.5us
Output Swing =1v
Diffential in differential out
off set <10mv
CMRR>60dB
noise <50nv/sqrt(hz) at 1khz
could you guide me more detail which topology i should choose for my device>
Thanks you so much .
I 'm a new beginner in electronic . I got a specification which need design by Candece .Unfortuately , I m not sure which topology i should choose for my deisgin.
This is my specification :
Design a two stage op amp which satisfy :
Using 0.18u technology :
Vdd=1.8 V
Gain>60db
Gain BW >5MHz
Setting <0.5us
Output Swing =1v
Diffential in differential out
off set <10mv
CMRR>60dB
noise <50nv/sqrt(hz) at 1khz
could you guide me more detail which topology i should choose for my device>
Thanks you so much .