Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Help me design a line driver that operates at 100Hz - 2 Mhz

Status
Not open for further replies.

overmars

Member level 3
Member level 3
Joined
Sep 11, 2006
Messages
65
Helped
5
Reputation
10
Reaction score
1
Trophy points
1,288
Activity points
1,754
Hi,guys

I need to design a line driver which will operate at 100Hz---2MHz,5V as Vcc and output connects to 2:1 transformer and current driving ability of 60mA as max should attained. The driver input ranges from 50mV to 4V.
Who can tell me which topology I shall use and procedures on how to design this line driver?

Thank you !
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top