Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

help in fdtd(gaussian pulse)

Status
Not open for further replies.

bdm_praveen

Newbie level 6
Newbie level 6
Joined
Dec 14, 2008
Messages
12
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,337
fdtd gaussian pulse

how to select t0 and spread for Gaussian pulse when calculating fields using Fdtd for an antenna..............
 

sinusoidal gaussian pulse in fdtd

In FDTD You shoul use a modulated gaussian impulse. the frequency of the RF sinusoidal tone should be the center frequency of the analisis band, and the duration af the pulse is 0.9/deltaf, where deltaf is the width of the band.
of corse t0 have to be less than 0.5/deltaf
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top