Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

help...broadband connection

Status
Not open for further replies.

DavidNelly

Member level 5
Member level 5
Joined
Sep 8, 2006
Messages
90
Helped
4
Reputation
8
Reaction score
3
Trophy points
1,288
Activity points
1,814
Dear colleagues.
My broadband link connection takes times to connect when my power system fail and start again. At first, it takes time about 5 minutes. But now, longer than it.
I don't know where is the problem.
Thanks
 

modem type ? operating system ? distance ? ISP (maybe DSLAM known) ?
 

Kindly, if the DSL on you modem is working that is mean your your line is working probrly frfom ISP sit to solve this problem
1- check the MTU configuration on your modem
2-check your NIC, my be causes this problem, or the interface card even you work via wireless
3-check Tepm. File some time causes many problems
after that if you didn't any problems from this componant you should contact with ISP to change the connection for you , sometimes the WAN connection PPPOA,PPPOE ot compatable with the parameter of line .
 

Thank you M Shaker,
I've changed the modem and now it is ok. Thank you for your hinks.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top