Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] frequency range of adc

Status
Not open for further replies.
S

sekaran72

Newbie level 4
Joined
Dec 7, 2011
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,312
hi,i am using msp430f2013 controller,i have an input signal in the frequency range of 800kHz-900kHz.whether my ADC can process the signal in the above mentioned frequency.
 

According to the data sheet, the ADC can sample at 200KHz.
To sample an AC waveform, the sample rate should be at least twice the frequency of the waveform being sampled.
So the short answer is no, it can not.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top