Bjtpower
Full Member level 5
Dear Friends
i am designing a flyback for the Following configurations.
I am taking the reference from the Calonel wm.T.Mcmylan Reference for the designs.
The Approach here shown to calculate the Kg Factor & Compare it with the DC-DC Handbook by Calonel. it gives only Magnetic Manufacture core References.
How to Select a core which are available in india like EPCOS,FERROXCUBE or others.
What parameter of calculation takes into accouns for.
Vin:180-250vdc
Vout:12 Amp
Efficiency:90% (Assume)
Dmax:50%
How to campare the core to core catalogue to get the same al value & all parameter in the same.
In TDK cores Datasheet, i am only getting attached Factors which is attached.
Kindly suggest
i am designing a flyback for the Following configurations.
I am taking the reference from the Calonel wm.T.Mcmylan Reference for the designs.
The Approach here shown to calculate the Kg Factor & Compare it with the DC-DC Handbook by Calonel. it gives only Magnetic Manufacture core References.
How to Select a core which are available in india like EPCOS,FERROXCUBE or others.
What parameter of calculation takes into accouns for.
Vin:180-250vdc
Vout:12 Amp
Efficiency:90% (Assume)
Dmax:50%
How to campare the core to core catalogue to get the same al value & all parameter in the same.
In TDK cores Datasheet, i am only getting attached Factors which is attached.
Kindly suggest