Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Flxible Substrate for antenna or RF circuit design

Status
Not open for further replies.

alacrity

Junior Member level 1
Junior Member level 1
Joined
Oct 15, 2015
Messages
15
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
111
Hello all ,

I want to use some flexible substrate for my antenna design as well as for circuit design at 900 MHz or higher range of frequency, can anybody help me please , that what substrate i can purchase. which are commercially available.

Thnx in advance
 

This link provides a list of soft substrate materials: https://www.microwaves101.com/encyclopedias/soft-substrate-materials

The below papers on IEEE discuss flexible systems that might be of interest to you.

[1] S. Lemey, S. Agnessens, P. V. Torre, K. Baes, J. Vanfletern and H. Rogier, "Wearable Flexible Lightweight Modular RFID Tag With Integrated Energy Harvester," IEEE Transactions on Microwave Theory and Techniques, vol. 64, no. 7, pp. 2304-2314, 2016

[2] S. Lemey, F. Declercq, and H. Rogier, “Dual-band substrate integrated waveguide textile antenna with integrated solar harvester,” IEEE Antennas Wireless Propag. Lett., vol. 13, pp. 269–272, Jan. 2014.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top