Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

flux density in coil - test problem

Status
Not open for further replies.

vicky

Full Member level 4
Joined
Aug 11, 2004
Messages
235
Helped
23
Reputation
46
Reaction score
4
Trophy points
1,298
Activity points
2,404
flux density

an iron ring length of 5 cm having a coil of 200 turns and an air gap of 1mm. 1 A current is fllowing through it if the premeability of the iron is 300 find the flux density
 

what is electronic flux density

Hi,

Known -
L=5 cm, N=200 turns, µr=300, µo=4π×10(-7)H/m, d=1mm=1×10(-3)m
A=πD²/4=7.85×10(-7)m²

Unknown -
flux density--->B=?
current--->I=?

Formulae -
Φ=BA; Φ=NI/R ;R=L/µA (reluctance);(Φ-magnetic flux);

By substitution-

BA=NI/R

B=µNI/L

B=µoµrNI/L= 1.501×I Tesla

substitute the numerical value of I to get the answer.

Regards
 

easypic

hi dear,
thank you very much for your help.


but where did I think the current is given in this problem

an iron ring of mean length 5 cma has an air gap of 1mm and a winding of 200 turns. If the permeability of iron is 300 when 1A current flows through the coil find the flux density.


am I right


and secondaly its answer is 94.2 mWb/m^3


thank you vey much for your help I look forward for your reply
 

flux density b and flux of iron

hi dear,

sorry with respect tell me if I have to pay than whats the benefit of you and other mine experiece persons in this forum go and I think look for a job
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top