Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Explanation of the NBTI process

Status
Not open for further replies.

deh_fuhrer

Full Member level 5
Joined
Jul 25, 2006
Messages
276
Helped
46
Reputation
92
Reaction score
18
Trophy points
1,298
Activity points
2,862
Could someone please explain the NBTi process.
 

Re: NBTI

NBTI stands for Negative Bias temperature instability.This is due to the trapping of holes at Si/SiO2 interface.
 

    deh_fuhrer

    Points: 2
    Helpful Answer Positive Rating
NBTI

It is the generation of interface traps when stressed at negative voltages... it is believed to be due to the reaction between cold holes and the Si-H bond at the interface...it is more in pmos devices
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top