Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Error in Reading floorplan file in ICC in Topographical Flow

Status
Not open for further replies.
M

Mariammm

Junior Member level 1
Joined
Mar 28, 2021
Messages
16
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
171
Hi,

I have a problem reading the floorplan file in ICC.
When I write the read_floorplan command in ICC to read the resultant floorplan file from DC-topo, it gives me many errors regarding the VDD and VSS nets.


I attached below the last error lines in the result of command read_floorplan execution.



Error: Invalid net name 'VDD' (HDUEDIT-006)
Error: Invalid net name 'VDD' (HDUEDIT-006)
Error: Invalid net name 'VDD' (HDUEDIT-006)
Error: Invalid net name 'VDD' (HDUEDIT-006)
Warning: Assuming command 'read_floorplan' is undoable (HDUEDIT-109)
1
 
Last edited:

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top