Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Enquiry of vacuum box size setting in HFFS v11

Status
Not open for further replies.
G

guillaumechen

Junior Member level 1
Junior Member level 1
Joined
Mar 9, 2009
Messages
18
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,391
Hi everybody,

I'm not sure whether my calculation of vacuum box size is correct or not ?

my calculation:

my design is tag antenna in UHF (908.5 - 914 MHz)

v = f x λ
=>3e8 = 910e6 x λ
=>λ = 330mm

if my antenna size is 40(X) x 50(Y) x 1.6(Z) mm
then, the vacuum box size is:

[(λ/4) + edge of XZ plane] x 2
x
[(λ/4) + edge of YZ plane] x 2
x
[(λ/4) + edge of XY plane] x2

Is it right?

Also, I don't know why I get two impedance response (pls check attachment). Is it correct?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top