Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Electric Fan Capacitor Connection

Status
Not open for further replies.

BillyC1

Newbie level 3
Joined
Aug 28, 2014
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
21
how to connect the wire in my new capacitor?
the first image have 3 wires on the right side 2(black) and 1(red)
on the left is yellow.. i am confuse which the positive and negative wires
i know in common connection red is the positive but i don't if the yellow is also
positive..


CAM00307_zpsrbgrvwle.jpg


CAM00309_zpsyota68yd.jpg




FBF120_zpsu36fdyty.png
 

Hi,,

there is no "positive" or "negative" wire, because it is AC.

All wires that were connected before must be connected after.

one possible solution is:
* capacitor black wire -- to--> black, black, red wire of fan.
* capacitor red wire -- to --> yellow, yellow wire of fan.

Be careful. Dangerous voltag and a lot of power from mains.
Carefully solder all components and isolate the solder joints.
Make sure the high potential does not touch any metal.

Klaus
 
  • Like
Reactions: BillyC1

    BillyC1

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top