niiayi22
Newbie level 4
Hi there. I've got an absolute ton of info on USB but it's all for the pic18f4550. I'm currently trying to edit the HID Mouse example in the MCHPFSUSB firmware pack but theres quite a bit to change. Additionally, there's alot of code concerning demo board kits (which i'm not using). Has anyone successfully got this or any of the USB examples working for the PIC18f2455 or any other undefined PIC? If so a point in the righ direction would be much appreciated!
Thanks.
PS: I'm using a ECIO28p module which has a bootlader already integrated onto the PIC (i also have the edited 18f2455 linker file to make room for the bootloader) but if this too complex to change for USB firmware code then i'll use a standard 2455 attached to a USB female plug.
Thanks.
PS: I'm using a ECIO28p module which has a bootlader already integrated onto the PIC (i also have the edited 18f2455 linker file to make room for the bootloader) but if this too complex to change for USB firmware code then i'll use a standard 2455 attached to a USB female plug.