Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Does HSPICE2004.09 include AWAVES for linux?

Status
Not open for further replies.

byron

Member level 3
Member level 3
Joined
Jan 25, 2002
Messages
62
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
372
awaves linux

During the installation and configuration I noticed there is awaves in the list, and there is a script file "awaves" in the /bin directory after configuration. But it shows "command not found, no awaves in /linux/bin" if runing awaves.
 

awaves

byron said:
During the installation and configuration I noticed there is awaves in the list, and there is a script file "awaves" in the /bin directory after configuration. But it shows "command not found, no awaves in /linux/bin" if runing awaves.

I don't think so.
 

error: avanwave is not supported on linux now

for i know, cosmos scope for linux.
 

error: avanwave is not supported on linux now.

mariaR said:
byron said:
During the installation and configuration I noticed there is awaves in the list, and there is a script file "awaves" in the /bin directory after configuration. But it shows "command not found, no awaves in /linux/bin" if runing awaves.

I don't think so.

Which one? The awaves in the configuration list or the awaves command is not found in the /linux/bin.
 

avanwave

Under Linux, C0sm0ssc0pe is used for viewing graphics.
@waves used for other platform.
 

please set environment variable display awaves

SpiceExplorer is another alternative
 

set environment variable display awaves

byron said:
During the installation and configuration I noticed there is awaves in the list, and there is a script file "awaves" in the /bin directory after configuration. But it shows "command not found, no awaves in /linux/bin" if runing awaves.

there is no avanwaves for linux
 

awaves alternative linux

Avanwaves has not been updated by Synopsys, which will be replaced by Cscope Waveviewer tools.
 

wine awave linux

There is no awaves in any Linux system. Personally, I will recommand sandwork's spice_explorer. Please reference there web site

**broken link removed**.

It's fast and powerful.
 

hspice/sparcos5/awaves: command not found

no avanwave for linux !
 

hspice shlib_path

Hi


Notice to all Edaboard members Guru!!

What did you think about to develope a customized hspice viewer for linux in this forum.

I have readed some times ago about some tries too.


tnx
 

awaves synopsys

it's a good idea. But how can we do it ?
 

running awaves on linux

byron said:
mariaR said:
byron said:
During the installation and configuration I noticed there is awaves in the list, and there is a script file "awaves" in the /bin directory after configuration. But it shows "command not found, no awaves in /linux/bin" if runing awaves.

I don't think so.

Which one? The awaves in the configuration list or the awaves command is not found in the /linux/bin.

awaves in linux is shell command
, but I don't like cosMOsscope , awaves is easy use .
cosMOsScope is poor tool ...

--------
setenv installdir hspice-x2005.09-sp1
unsetenv GALAXYHOME

if (! $?ARCH) then
set ARCH = `$installdir/bin/get_arch `
endif

if ($ARCH == unknown) then

cat << FUBAR

Error: Unable to determine Operating System or Architecture!

Please execute the following command: uname -a

Call Synopsys Customer Service and report the results immediately.

FUBAR
exit 1
else if(($ARCH != hp32) && ($ARCH != sparcOS5) && ($ARCH != rs6000)) then
cat << FUBAR

Error: AvanWave is not supported on $ARCH now.

FUBAR
exit 1
endif

if ( $?LD_LIBRARY_PATH ) then
if ( "$LD_LIBRARY_PATH" !~ *"$installdir/$ARCH"* ) then
setenv LD_LIBRARY_PATH $installdir/"$ARCH":$LD_LIBRARY_PATH
endif
else
setenv LD_LIBRARY_PATH $installdir/$ARCH
endif

if ( $?LIBPATH ) then
if ( "$LIBPATH" !~ *"$installdir/$ARCH"* ) then
setenv LIBPATH $installdir/"$ARCH":$LIBPATH
endif
else
setenv LIBPATH $installdir/$ARCH
endif

if ( $?SHLIB_PATH ) then
if ( "$SHLIB_PATH" !~ *"$installdir/$ARCH"* ) then
setenv SHLIB_PATH $installdir/"$ARCH":$SHLIB_PATH
#if (! $?DISPLAY) setenv DISPLAY `hostname`:0
if ( ! $?DISPLAY ) then
echo -n " o Please set environment variable DISPLAY"
exit 1
endif

if ( `echo $DISPLAY | egrep -c '^:$'` == 1 ) setenv DISPLAY `hostname`:0.0
if ( `echo $DISPLAY | egrep -c '^:'` == 1 ) setenv DISPLAY `hostname`$DISPLAY
if ( `echo $DISPLAY | egrep -c ':'` == 0 ) setenv DISPLAY ${DISPLAY}:0.0

if (! $?ExecCmd) then
set ExecCmd = "$installdir/$ARCH/awaves -laf motif"
endif

echo
echo o Running $ExecCmd on $DISPLAY
echo

$ExecCmd $* &
 

awaves on linux

My platform is linux ,and i find a dirctory named "linux" under hspice intall directory,
But i can't find any command named "awaves" under "linux" directory
 

awave for linux

sorry , I am wrong , synopsys only support cosmosScope on Linux ,
awave on windows/Unix .. cosmosScope also have windows version
, maybe you can try use "wine + windows awaves" under linux
but I have interesting is hspice new model "level66"

have anyone already use level66 spice model ?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top