Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Disturbuted amplifier Design

Status
Not open for further replies.
V

venu.gongal

Member level 5
Joined
Apr 24, 2009
Messages
81
Helped
14
Reputation
28
Reaction score
10
Trophy points
1,288
Location
INDIA
Activity points
1,698
Hi

Can anyone help me how to flat gain from DC-10GHz using Disturbuted amplifiers.. I am able t flat gain from 2GHz-10GHz employing cascode DA architecture.. but how to obtain flat gain from DC-2GHz (there's a roll off..from 15dB to 7dB)..



Thanks
Venu
 

Its almost impossible to get flat gain (10GHz to DC) with a DA. You will be lucky if you can go down to about 500MHz.
 
A ripple pf @max +/-1dB from 500MHz-10GHz.. is it achievable..

My schematic results obtained shows that its achievable when i do a layout simulation the gain slope falls.

Can I reduce the gain @ lower frequencies..?

Thanks
Venu
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top